O-ring, backplate 20x1.4mm (TRX 2.5, 2.5R)
Low speed spray bar screws, 2x4mm roundhead machine screws (6)
Double-sided adhesive tape (25mm x 25mm) (2)
Wrist pin clips (3) (TRX 2.5, 2.5R)
Pins, axle (2.5x12mm) (4)
O-ring, header 12.2x1mm (TRX 2.5, 2.5R, 3.3)
Springs: throttle/brake/shift (3)
Spacers, aluminum, 3x6x12mm (2)
Washer, Teflon 6x9.5x.5 (10)
Washer, Teflon 6x8x0.5 (10)
Spacers, plastic, 5x10x2 (Monster Buggy front arms)
Hanger wire, universal (6-inches, cut and bend to suit)
Spacers, aluminum, 5x9x4mm (2)
Gasket, back plate
Screws, 3x26mm washerhead machine (6)
Motor screws (3x8mm washerhead machine) (6)
Screws, 3x30mm washerhead machine (6)
Screws, 2.6x8mm washerhead self-tapping (6)
Screws, 3x12mm washerhead self-tapping (6)
Screws, 3x8mm washerhead machine (large head for motor mount) (6)
G-spring retainers (wrist pin keepers) (3)
Pull string, starter
Screws, 3x12mm countersunk machine (6)
Screws, 3x15mm countersunk machine (6)
Screws, 3x14mm washerhead self-tapping (6)
Screws, 3x10mm countersunk machine (6)
Screws, 3x10mm washerhead machine (6)
Screw set, transmission (N. Hawk/ Street/ Buggy)
Screws, 3x15mm washerhead machine (6)
Screws, 3x20mm washerhead machine (6)
Screws, 2.5x19mm roundhead machine screws (4)
Screws, 3x12mm washerhead machine (6)
Adapters, wheel (for use with aftermarket wheels in order to adjust wheel offset)
Screw pin, 2.5x18mm (6)
E-clips, 2mm (24)
Screws, 2x4mm caphead machine (hex drive) (3) w/lockwashers
Pull string, recoil starter (TRX 2.5, 2.5R)
Hanger, Revo big block kit (black)
Gaskets, differential/transmission
Rubber plugs, charge jack, two-speed adjustment (Jato)
BELLEVILL SPRING WASHERS
Attachment bracket, plug/ foam tape/tie wrap/ 3x10mm wst screw (old style, replace with 4132)
Fuel cap, screw-on (new style)
Screws, 3x8mm washerhead self-tapping (6)
Screws, 3x15mm washerhead self-tapping (6)
Spring, throttle return (2) (Nitro 4-Tec)
Caster wedges, reactive (2)
Ball screws (3x12mm) (lower shock attachment screws) (6)
Adjustment spacers, caster (1.5mm & 2.0mm) (4-each)
Screws, 3x18mm washerhead self-tapping (6)