Pins, axle (2.5x12mm) (4)
Selecteer ter vergelijking
Screws, 3x18mm roundhead machine (6)
Flathead engine mount screws 3x10, hex head, machine
Glow plug wrench (universal wrench)
Screws, 2.5x6mm cap-head machine (hex drive) (6)
Silicone diaphragms (4)
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
Screws, 2.5x8mm cap-head machine (6)
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Head screws, 3x15mm cap-head machine (hex drive) (6) (TRX 2.5)
Springs, red (for big bore shocks) (2.5 rate) (2)
Cover plates and seals, forward only conversion (Revo) (Optidrive blank-out plate, Optidrive sensor cover, shift fork cover)
Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
Multi-tool (plastic)
Screws, 3x6mm cap-head machine (hex drive) (6)
Screws, 3x8mm countersunk machine (6) (hex drive)
Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw
Screws, 3x18mm button-head machine (hex drive) (6)
Screws, 3x12mm countersunk machine (6) (hex drive)
Screws, 3x15mm countersunk machine (6) (hex drive)
Screws, 3x12mm button-head machine (hex drive) (6)
Screws, 3x6mm button-head machine (hex drive) (6)
Body washers (8)
Silicone grease
Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench
Wheel wrench, splined, 17mm
Spring contacts, transmitter (for TQ series transmitter battery compartment)
Tie bar, rear (1) /3x18mm BCS (2) (fits all Maxx trucks)
Output gear, 33-tooth (1)/ spacers (2)
Decal sheet, racing sponsors
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
Body, Ultra Shock(s) (XXL) (grey) (2)
Gear, 17-T pinion (32-p) (mach. steel)/ set screw
Crystal holders, transmitter & receiver/ decal sheet
Antenna caps, vinyl (2)/ antenna spool
Screws, 3x10mm button-head machine (hex drive) (6)
Nuts, 4mm nylon locking (10)
Silicone shock oil (30 wt)
Gear, 22-T pinion (32-p) (mach.steel)/set screw
Set (grub) screws, 3x25mm (8)/ 3mm nylon locknuts (8)
Screw pins, 4x13mm (with threadlock) (4)
Nuts, 5mm flanged nylon locking (steel, serrated) (8)
Gear, 21-T pinion (32-p) (mach. steel)/ set screw
Gear, 20-T pinion (32-p) (mach. steel)/ set screw
Gear, 18-T pinion (32-p) (mach. steel)/ set screw
Bulkhead cross braces (2)/ 3x25mm CS screws (8)
Gear, 19-T pinion (32-p) (mach. steel)/ set screw
Bumper mounts, front (l&r)/ bumper mounts, rear (l&r)/ 3x12mm RHM screws (8)
Screws, 3x15mm button-head machine (hex drive) (6)
Gear set (for 2065 waterproof sub-micro servo)