Double-sided adhesive tape (25mm x 25mm) (2)
Selecteer ter vergelijking
Screws, 3x8mm washerhead machine (large head for motor mount) (6)
Washers, 3x6mm metal (12)
Flathead engine mount screws 3x10, hex head, machine
Stub axle pins (4)
Screws, 2.5x6mm cap-head machine (hex drive) (6)
Screws, 2.6x8mm countersunk machine (6)
Nuts, 3mm nylon locking (12)
Silicone diaphragms (4)
Screws, 3x23mm button-head machine (hex drive) (6)
Head screws, 3x15mm cap-head machine (hex drive) (6) (TRX 2.5)
Screws, 3x18mm button-head machine (hex drive) (6)
Screws, 2.5x5mm button-head machine (hex drive) (6)
Screws, 3x15mm flat-head machine (hex drive) (6)
Screws, 3x6mm flat-head machine (hex drive) (6)
Screws, 3x8mm flat-head machine (hex drive) (6)
Screws, 3x30mm button-head machine (hex drive) (6)
Screws, 4x12mm button-head machine (hex drive) (6)
White plastic washers (5x8x1.0mm) (6)
Screws, 4x15mm countersunk machine (hex drive) (6)
Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw
Screws, 3x20mm button-head machine (hex drive) (6)
Screws, 3x12mm countersunk machine (6) (hex drive)
Screws, 4x12mm countersunk machine (hex drive) (6)
Screws, 3x8mm button-head machine (hex drive) (6)
Screws, 3x12mm button-head machine (hex drive) (6)
Screws, 3x6mm button-head machine (hex drive) (6)
Screws, 3x6mm cap-head machine (hex drive) (6)
Body washers (8)
Silicone grease
Mounting plate, speed control (VXL-3s) (Bandit, Rustler, Stampede)
Battery hold-down plate (grey) / metal posts (2) / body clips (2)
Body, Ultra Shock(s) (XXL) (grey) (2)
Gear, pinion (25-tooth) (48-pitch) / set screw
Body, Ultra Shock(s) (long) (grey) (2)
Top drive gear, steel (22-tooth)
Motor cover, endbell (Velineon 3500)
Screws, 3x40mm button-head machine (hex drive) (6)
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
Set (grub) screws, 3mm hardened (12)
Bumper (front)
Crystal holders, transmitter & receiver/ decal sheet
Screws, 3x10mm button-head machine (hex drive) (6)
Suspension pins, 44mm (2) w/ E-clips
Teflon washers, 5x8x0.5mm (20) (use with ball bearings)
Wheel hubs, hex (2)/ stub axle pins (2)
E-clips/ C-rings
Silicone shock oil (30 wt)
Nuts, 4mm nylon locking (10)
Dust cover/rubber plug (w/ screws) (Stampede/Rustler)