Screws, 3x8mm washerhead machine (large head for motor mount) (6)
Selecteer ter vergelijking
Washers, 3x6mm metal (12)
Flathead engine mount screws 3x10, hex head, machine
Stub axle pins (4)
Screws, 2.6x8mm countersunk machine (6)
Springs, front (black) (2)
Silicone diaphragms (4)
Nuts, 3mm nylon locking (12)
Springs, rear (black) (2)
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
Screws, 2.5x5mm button-head machine (hex drive) (6)
Screws, 2.5x12mm cap-head machine (6)
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Screws, 3x15mm flat-head machine (hex drive) (6)
Screws, 3x23mm button-head machine (hex drive) (6)
Screws, 4x12mm button-head machine (hex drive) (6)
Screws, 3x6mm flat-head machine (hex drive) (6)
Screws, 3x8mm flat-head machine (hex drive) (6)
Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2)
White plastic washers (5x8x1.0mm) (6)
Screws, 3x12mm countersunk machine (6) (hex drive)
Screws, 4x12mm countersunk machine (hex drive) (6)
Head screws, 3x15mm cap-head machine (hex drive) (6) (TRX 2.5)
Screws, 3x6mm cap-head machine (hex drive) (6)
Piston head set, (2 sets of 3 types)/ shock collars (2)/ spring retainers (2)
Screws, 3x30mm button-head machine (hex drive) (6)
Screws, 3x20mm button-head machine (hex drive) (6)
Screws, 3x12mm button-head machine (hex drive) (6)
Screws, 3x6mm button-head machine (hex drive) (6)
Body washers (8)
Silicone grease
Mounting plate, speed control (VXL-3s) (Bandit, Rustler, Stampede)
Mounting plate, electronic speed control/ receiver box (for installation of XL-5/ XL-10/VXL and waterproof receiver box into Stampede)
Motor cover, endbell (Velineon 3500)
Body, Ultra Shock(s) (long) (grey) (2)
Gear, pinion (25-tooth) (48-pitch) / set screw
Body, Ultra Shock(s) (XXL) (grey) (2)
Bumper (front)
Decal sheet, racing sponsors
Top drive gear, steel (22-tooth)
Screws, 3x40mm button-head machine (hex drive) (6)
Shock shafts, steel, chrome finish (long) (2)
Set (grub) screws, 3mm hardened (12)
Shock shafts, steel, chrome finish (X-long) (2)
Antenna caps, vinyl (2)/ antenna spool
Teflon washers, 5x8x0.5mm (20) (use with ball bearings)
Nuts, 4mm nylon locking (10)
Wheel hubs, hex (2)/ stub axle pins (2)
E-clips/ C-rings
Silicone shock oil (30 wt)